Specs for DT-D200 – 200 L Double-Drum Industrial Tumbler:

Dual-Axis Explosion-Proof Mixer for Sealed Drum Chemical and Adhesive Processing

Product Overview:

The DrumTumbler manufactures DT-D200 is a high-capacity, explosion-proof double-drum tumbler engineered

 for intensive, closed-container mixing.

Two sealed 200 L (≈ 55 gallon) drums rotate together on independent drives, generating a 

dual-axis corner-over-corner motion that blends viscous or particulate materials with outstanding uniformity.

This model is the preferred solution for paint, adhesive, resin, ink, catalyst, and specialty-chemical production, 

where safety, precision, and throughput are critical.

Its fully enclosed operation eliminates transfer steps and keeps volatile compounds securely contained.

Technical Specifications:

Distinct Advantages:

1)Dual-Drum Productivity – Blend two sealed 200 L drums in one cycle to double throughput.

2)Explosion-Proof Safety – Designed for solvent-based and flammable materials.

3)Dual-Axis Motion Dynamics – Provides deep cross-layer agitation for high-viscosity batches.

4)Fully Sealed Mixing – Contains fumes and dust, keeping work areas clean and safe.

5)Adjustable Speed Control – Fine-tune rotation between 5 and 20 RPM to match material behavior.

Industrial Endurance – Built for continuous operation with reinforced bearings and balanced shafts.

Safety & Ergonomics：

1)Mix chemicals directly inside sealed drums – no open handling, no exposure.

2)Each drive is independently protected by thermal and electrical safeguards.

3)Optional interlocked guard enclosure ensures operator safety in hazardous zones.

4)Meets global standards (OSHA / CSA / EU) for machine protection and operator safety.

Optional Accessories:

Typical Applications:

1）Chip Bonding Adhesives – Re-homogenize high-viscosity adhesive drums before dispensing.

2）Catalysts & Curing Agents – Re-blend aged batches to restore uniform performance.

3）PU & Silicone Sealants – Maintain consistent texture and workability.

4）UV & Screen Printing Inks – Ensure color stability after long-term storage.

5）Industrial Paints & Coatings – Re-mix sealed 55-gallon pails for uniform finish.

6）Epoxy & Polyester Resins – Balance two-part systems for accurate curing.

7）Solder Mask & Photoimage Inks – Prevent settling and maintain particle dispersion.

8)Battery Slurries & Conductive Pastes – Re-activate stored electrode materials.

9)Pigment Concentrates & Color Masterbatches – Achieve consistent dispersion.

10)Lubricants & Additives – Homogenize dense oil-based blends for stable performance.

Additional Applications in Petroleum & Oilfield Chemicals:

1)Lubricating Oils and Greases – Re-homogenize stored drums of high-viscosity greases, engine oils, and gear lubricants.

2)Drilling Fluid Additives – Re-blend drilling mud components, emulsifiers, and anti-foaming agents before field use.

3)Fuel & Petrochemical Additives – Shake sealed containers of fuel improvers, cold-flow additives, and octane boosters.

4)Synthetic Oils and Base Stocks – Maintain uniform viscosity and additive dispersion in synthetic lubricants.

5)Bitumen & Asphalt Emulsions – Gently agitate sealed drums to restore homogeneity before application.

FAQ:

Q1 – Can the DT-D200 handle solvent-based materials?

Yes. Its explosion-proof motors and sealed drums make it ideal for flammable formulations.

Q2 – Are the two drums controlled independently?

Yes. Each drive has its own speed controller for individual batch settings.

Q3 – Which drum types fit the machine?

Standard 55-gallon (200 L) steel, plastic, or fiber drums fit securely.

Q4 – Is a guard enclosure mandatory?

Yes. It is required for compliance with OSHA / CSA / EU safety codes.

Q5 – Can this model operate continuously?

Absolutely. It is built for 24-hour industrial duty with reinforced drive assemblies.

Packing method:

1)Inside with film packaging